Home > Questions and Answers > Tracking Questions

---

Help with postback needed please. Voluum/Maxbounty (11)

---

Check this thread :

https://stmforum.com/forum/showthrea...6-Problem-with

So looks like s1 is the way to go with them.

I don't think you should use upper case S1, I 'm using lower case at all networks ... they use lower case in their examples too.

Use the postback url that you see in the Voluum setup, there should be 2 of them, one regular and one secure (https) and both should work.

What backend do they use actually, cake or hasoffers or something else? Some systems use {} instead of ## ... but I'm not sure what they are running on. Any idea?

---

Hey @matuloo, I already read that post and that's where I learned to make it S1 instead of S2, thanks for looking into it anyways.

---

So I received another conversion and the postback worked.... kinda. Voluum is showing that I got a conversion and that part is great but it didn't show the commission/ payout. So at this point I think it has to do with the capitalization of the letters in between the # symbols.

---

Hey Theo,

I sent you an e-mail with some information regarding this!

---

I’d love to get some insight on this too. I built out the Prosper202 link assist feature to automatically format the aff link with s2=[[subid]] based on instructions in your backend.

But it doesn’t work, and reporting is not as good as using s1.

I’m about to switch back to s1 in the next release of Prosper202 and wanted to get the official word on this.

Thanks

---

Hey @matuloo

I haven't asked what backend they use but in their examples they use the # symbols.

---

I’m pretty sure it’s all custom.

---

Might be. will be on the phone with a MB rep tomorrow. Actually will be with Brody Curtis from above. I'll post the conclusion tomorrow.

---

Ok so here is the solution - Finally figured it out!
So the proper way to set up postback URL for Maxbounty with Voluum:
1. Copy postback URL from Voluum and paste in the profile link in your MB account. (On left side menu) and replace the optional values http://xxxxx.voluumtrk.com/postback?...&txid=OPTIONAL
So replace "REPLACE" with #S2# and payout= "OPTIONAL" with #RATE# and I got rid of "txid=OPTIONAL" IMPORTANT: Letter capitalization is critical
2. Copy offer link from MB: "http://www.mb104.com/lnk.asp?o=4939&c=56752&a=231926&l=3777
3. Enter link in Voluum while creating a new campaign and insert the parameters to pass the info to MB: "http://www.mb104.com/lnk.asp?o=4939&c=56752&a=231926&l=3777&S2={clickid } you can just click the button under the area where you pasted the offer link but you will need to add "&S2=" before hand or add it in after but must be added.
At this point all is set up and ready to go. As far as I know, you will only be able to see the click id for conversions only after downloading the csv report for "Campaign Leads" and the postback did report it back to voluum so I got it there as well. If anyone knows any other way please post. Next I'm gonna see what other info I can get passed back. Good luck to me. Ha
Oh and thanks to all that posted and helped.
ps. Brody Curtis from Maxbounty was extremely helpful and awesome throughout the whole process. My AM was out of office but I'm sure would have gotten the same great service.

---

One more thought on this. It would be nice to get the click id "#S2#" info on all clicks so I can use for cross referencing with Voluum data for optimization. If this is possible please let me know.

---

Hey Mark,

If you want the click id on every click ( not just the leads) you can set it under S1 which is internal in MaxBounty. Before doing this please contact your AM and let them know!

---

Home > Questions and Answers > Tracking Questions