Home > Questions and Answers > Traffic Source Questions

Propellerads has 65% of WIFI Click Loss? (7)

03-10-2018 01:08 PM #1 noxnox (Member)
Propellerads has 65% of WIFI Click Loss?

Click image for larger version.  Name: QQ??20180310215507.png  Views: 42  Size: 47.5 KB  ID: 18344

Click image for larger version.  Name: QQ??20180310215512.png  Views: 40  Size: 50.9 KB  ID: 18345

Click image for larger version.  Name: QQ??20180310215519.png  Views: 38  Size: 60.7 KB  ID: 18346

affiliate network：monetizer
tracking system：Voluum
traffic source：Propellerads
GEO:ZA
Carrier:WIFI


What is the reason for such a large gap?

I admit, I tested 2 conversions.

03-12-2018 08:47 PM #2 matuloo (Legendary Moderator)

Some GEOs have very large discrepancies, but this is to much.

Try to analyze the traffic a bit ... do you see a lot of visits from the same placements or IP or some other targeting group? Could be bots that get lost in the redirect process.

03-13-2018 03:08 AM #3 erikgyepes (Moderator)

Looks a bit lot to me.

What is your setup for hosting LP? Is it on some VPS "far away" from ZA?

I highly recommend using a CDN for your mobile campaigns, if you do not use already.

Also as @matuloo suggest above me -> you should do a zone per zone comparison, sometimes some zones have higher clickloss than others.

This would not concern me much if those zones would be profitable, but if they are just sucking your budget and do not generate conversions/profit I would kill them right away.

Your clickloss problem should improve then.

03-13-2018 08:47 AM #4 khzidan (AMC Alumnus)

Check your server CPU if you are using VPS or your daily traffic limit if u r using shared hosting...

04-17-2018 09:29 AM #5 noxnox (Member)

thank you! guys!

04-17-2018 12:34 PM #6 thien425 (Member)

Quote Originally Posted by matuloo View Post
Some GEOs have very large discrepancies, but this is to much.

Try to analyze the traffic a bit ... do you see a lot of visits from the same placements or IP or some other targeting group? Could be bots that get lost in the redirect process.
I just tried this and found a zone that got 308 impressiongs but Voluum only showed 37! How you do pause zones in Propellar? I can't seem to find where to do it.

04-20-2018 08:20 AM #7 vortex (Senior Moderator)

Quote Originally Posted by thien425 View Post
I just tried this and found a zone that got 308 impressiongs but Voluum only showed 37! How you do pause zones in Propellar? I can't seem to find where to do it.
It's easy - just go into edit mode for your propellerads camp and scroll down to this section:



In the screenshot, the "Exclude" is toggled off, meaning any zone ID you put in there will be targeted, i.e. whitelisted.

If you're wanting to list zones to blacklist, you would toggle that setting - then any zone IDs you list would be excluded (blacklisted).



Amy

Home > Questions and Answers > Traffic Source Questions