Home > Paid Traffic Sources > Facebook & Instagram

Which cloaker is working with FB or if cloaking is even working with FB now? (18)


11-06-2017 09:08 AM #1 suntuu (Member)
Which cloaker is working with FB or if cloaking is even working with FB now?

Been using JCI for a while, but from past few weeks getting accounts banned left and right.

And no, this is not my setup. As soon as I am turning the campaign status "Active" on my cloaker the ads are getting instantly disapproved and the account is being flagged for policy violations. I've tested this with 3 accounts now.

So just wanted to get feedback on which cloaker is working well for FB these days, and is there anybody else who's been experiencing this? Is it the cloaker, or is it with FB cloaking in general.


11-06-2017 09:27 AM #2 klanzz (Member)

TrafficArmor and NoIP are probably the best on the market right now.


11-06-2017 09:30 AM #3 stickupkid (Senior Moderator)

You sure it's the cloaking triggering FB to kick your behind?


11-06-2017 09:58 AM #4 nickpeplow (AMC Alumnus)

how are you cloaking? If you're running mobile campaigns then its absolutely essential that you use the no-redirect method, as their app reports back


11-06-2017 10:06 AM #5 suntuu (Member)

Quote Originally Posted by nickpeplow View Post
how are you cloaking? If you're running mobile campaigns then its absolutely essential that you use the no-redirect method, as their app reports back
This could be the reason. I am not using the no-redirect method. Damn. that must be it then. I did read about this in your other answer regarding adwords where you said that chrome reports the URL back, so it must be similar with FB now.
Is there a way to use no-redirect method with an external website. I did try using curl to load my Voluum campaign URL, but it didn't work. My Voluum URL made it's redirection and changed the URL of the page where I placed the curl code


11-06-2017 10:29 AM #6 nickpeplow (AMC Alumnus)
Which cloaker is working with FB or if cloaking is even working with FB now?

You need to create and own the clean site that you're using, the "tracking link" cloaking method attracts far too much attention. I'm sure there are others getting it working, but never personally had success at scale

I'm guessing this dirty campaign was also the first time the tracking domain was introduced? big flag.


11-06-2017 10:39 AM #7 desteny (Member)

Can't use Voluum with include method as they don't support pixel tracking.


11-06-2017 10:48 AM #8 koolfashion (Member)

FunnelFlux works with include method.


11-06-2017 11:05 AM #9 suntuu (Member)

Quote Originally Posted by nickpeplow View Post
You need to create and own the clean site that you're using, the "tracking link" cloaking method attracts far too much attention. I'm sure there are others getting it working, but never personally had success at scale

I'm guessing this dirty campaign was also the first time the tracking domain was introduced? big flag.
I own a clean site. I was just not able to figure out how to utilize this no-redirect method with my clean site and my Voluum tracking URL. As you need both Landing pages(clean and cloaked) hosted on same server in same directory, right?


11-06-2017 01:20 PM #10 nickpeplow (AMC Alumnus)
Which cloaker is working with FB or if cloaking is even working with FB now?

You won’t be able to track with Voluum in the traditional way.

- Voluum impression pixel on landing page, so you get a feel for lp ctr
- landing page CTA is the Voluum campaign link, but direct linked to the offer

Might be a little brief, but hopefully it helps


11-06-2017 05:51 PM #11 suntuu (Member)

Quote Originally Posted by nickpeplow View Post
You won’t be able to track with Voluum in the traditional way.

- Voluum impression pixel on landing page, so you get a feel for lp ctr
- landing page CTA is the Voluum campaign link, but direct linked to the offer

Might be a little brief, but hopefully it helps
Thanks. It does help.

I was thinking iframe? can that work?


11-08-2017 11:05 AM #12 desteny (Member)

Iframe works fine, but it is not suggested method as it will cause traffic loss and lower numbers due to iframe being glitchy in different browsers/devices. But if you are into details and will run tests tests for bugs, you will be fine aswell. Abit harder to use fb pixel with iframe as it will still show redirected page.


11-12-2017 02:21 AM #13 suntuu (Member)

Quote Originally Posted by desteny View Post
Iframe works fine, but it is not suggested method as it will cause traffic loss and lower numbers due to iframe being glitchy in different browsers/devices. But if you are into details and will run tests tests for bugs, you will be fine aswell. Abit harder to use fb pixel with iframe as it will still show redirected page.
Is there a way you would recommend on how to set this up? Which tracker to use etc. etc. Would really appreciate it. You are right about iframe. I tried it, but it didn't feel right, something was off.


11-14-2017 06:51 PM #14 bumbarda (Member)

We are about to release a new tracking software which has cloaker and safe page management built in. We have been building this software for more than 1.5 year and we are proud of it.

Campaign setup for the new FB accounts takes 5 to 10 minutes including the setup of a completely new safe page. and zero redirects We also have mediabuy team support with shared access. A private test with few superaffiliates showed 100% positive responce rate

The landing page describing all the features should be ready very soon, meanwhile anybody who is interested in this PM me, it’s going to be free to test until December.


01-05-2019 07:23 PM #15 enjoyinglife (Member)

I would love to test it. Skype: pingmadhankumar


01-07-2019 12:07 AM #16 vortex (Senior Moderator)

Quote Originally Posted by enjoyinglife View Post
I would love to test it. Skype: pingmadhankumar
That post was from over a year ago, so their offer of the service being "free to test until December" should be long-expired - I think this is their website if you want more info:

https://zeustrak.com



Amy


01-07-2019 12:20 PM #17 bastien (Member)

BeMutt


01-26-2019 03:58 AM #18 moneyrunners (Member)

I developed a cloaker that's more advance than traffic armor or anything else on the market. At the time it's giving me an edge over everyone. But I will allow a few users on it. Let me know if your interested.


Home > Paid Traffic Sources > Facebook & Instagram